How to make a fishing tackle. Design and features of use of grabber fishing tackle. Recipe for making a catchy bait for crucian carp

  • Following. Fishing tackle - GRAPPER, clapper, folding spider, VERY catchy Far Eastern tackle. Cross for winter spider. (Winter Spider) - Duration: 4:1*** Fishing with Kuzmich 23,533 views.
    https://www.youtube.com/watch?v=zEnfWwqUsDI
  • Grabber - winter fishing tackle... We present to your attention the winter fishing tackle Grabber. The video shows the principle of operation of the tackle... Added 3 years ago.Grabber, firecracker, cotton, spider, fishing... Demonstration of work fishing tackle Grabber for winter fishing from the ice. Added 2 years ago. Channel: Azov-Nevod.
    http://www.fassen.net/show/Grabber winter tackle
  • We present to your attention the winter fishing tackle Khapuga. How to make a hunting paraffin heating pad - Duration: ***:35. Hunter 2,241 views.KVH SovKhakassia Winter fishing. Perch for grabber. - Duration: ***:32. morfiy_1*** 1.7***0 views.
    https://www.youtube.com/watch?v=9RiK94Xd_0g
  • AZOV NETWORKS | Fishing umbrella grabber, winter tackle (azovseti.ru) Tel number --***-***0***-431-1***-***2 Mail -- [email protected] Website -- Azovseti.ru. Added 2 years ago. Channel: Igor Volg...Grabber, firecracker, cotton, spider, fishing... Demonstration of the operation of the Grabber fishing tackle for winter fishing from ice.
    http://www.fassen.net/show/Fishing tackle umbrella
  • Demonstration of the operation of the Khapuga fishing tackle for winter ice fishing.
    https://www.youtube.com/watch?v=4U4GRsleyGs
  • Winter fishing tackle Khapuga from Azov-Nevod. We invite you to familiarize yourself with the principle of operation of the winter fishing tackle Khapuga. Fishing with the "KOSYNKA" tackle - Süre: 1:31.
    https://www.youtube.com/watch?v=uj4kO5i4miI
  • The principle of operation of the winter fishing tackle Grabber! Grabber, firecracker, cotton, spider, fishing tackle. AZOV NETWORKS | Winter tackle grabber umbrella (azovseti.ru). aliexpress buy grabber fishing tackle. how to catch a feeder using a Chinese net. KVH SovKhakassia Winter fishing. Perch for grabber.
    http://portall.zp.ua/?c=video&q=winter fishing tackle grabber
  • You were looking for how to make a fishing grabber. Fishing tackle - GRAPPER, firecracker, folding spider, VERY catchy Far Eastern tackle. WATCH Time - 12:02, Liked - 21, Disliked - 0. How to make a grabber with your own hands at home. KVH SovKhakassia Winter fishing. Perch for grabber.
    http://czbeerclub.ru/search/how to make a fishing grabber
  • KVH SovKhakassia Winter fishing. Perch for grabber. - Duration: ***:32 morfiy_1*** 2 ********* views.Grabber, firecracker, cotton, spider, fishing tackle - Duration: 3:26 Dexp-tungus Fishing troops 57,277 views.
    https://www.youtube.com/watch?v=kmgiXJLjm84
  • How to make a fish grabber. Fishing tackle - GRAPPER, clapper, folding spider, VERY catchy Far Eastern tackle. Grabber, clapper, cotton, spider, fishing tackle. Fishing, Poachers, TOP-10 Poaching methods of fishing. winter spider for catching live bait Tests.

Many of us have some kind of hobby. For some it’s travel, others enjoy horse riding, and others like fishing. You can do a lot of things for fishing yourself using available materials. The main thing is to approach the process responsibly and put in a little effort.

Grabber is a fishing tackle

Fishing tackle called khapuga is an active tackle that consists of a float, fishing line, wings and four springs. The method of fishing is quite simple. You need to carefully arrange the gear and sit nearby, waiting for the fish to get into it and hit the side wing. Then quickly, with a jerk, you should lift it up. The mechanism is designed in such a way that the fish will either get entangled in the wing or be caught by the folded lift.

This way fishing applies all year round. A grabber is a fishing tackle river fish, which does not hibernate and moves in a body of water. In addition, you can fish around the clock. To use additional lighting. For example, it is very easy to lure crucian carp by illuminating the hole with a flashlight.

Do-it-yourself grabber - it's easy

Despite the abundance of various types of fishing equipment, many fishermen use their own gear. And the quality of fishing does not suffer from this. It’s worth noting right away that a grabber is a fairly simple and convenient tool that is easy to make with your own hands.

What is needed to make a grabber?

The secret of its production is quite simple. We will need:

Fabric net;

Line net;

Insulating tape on a fabric basis;

Springs - 4 pcs;

Small wire ring;

Lead sinker;

Float;

The basis is a thread net with a small cell diameter, approximately 0.3 cm. For triangular wings, it is better to take a stronger, fishing line net, because the wings bear the brunt of the impact when catching fish. In order for the grabber to slam shut successfully without getting entangled in the springs, they are wrapped with electrical tape. It is better to take one that is made of fabric, unlike synthetic, and can withstand the cold. We construct 4 rods from the fishing line, fasten each one to the ends of the rods, freely stretching them through the side cells. At the top, all the rods are brought together in a wire ring, secured in the hole of the float. The traction cord is also attached here - you can use it to control the gear. Another important element of the gear called a grabber is the springs that are attached to the central load. Sinking to the bottom, the tackle, thanks to the load, should open up and take a horizontal position. And when a fish gets caught in it, it slams sharply when rising and does not allow the prey to escape.

It is also necessary that the rods slide freely without catching or getting tangled. It is better to choose a load made of lead, and its weight should take into account the depth, size of the gear and current. The ends of all four springs should be at the base of the sinker. A fishing line is attached to it.

As you can see, do-it-yourself grabbing is quite easy to do. The main thing is to take into account all the recommendations and use it correctly required material. Then the fishing will be successful and will bring not only a good catch, but also pleasure from the process itself.

To have a good time fishing and return home with a good catch, lovers of such recreation buy expensive fishing rods, baits, technical means. But using homemade or factory-made grabber fishing tackle, you can achieve results with a small investment.

The specialized fishing product vaguely resembles a lift or a fishing spider. These gears consisted of a frame made of metal and a stretched net. The product was lowered into the water, waited for some time and fast movement got it. But these devices for catching fish had large sizes, and the fishing process was extended over time. The grabber has a more complex design, but the fishing efficiency with this trap also increases. The product also has other names: cotton, cracker, umbrella.

What elements does it consist of?

The composition of this active gear may vary depending on the specific use. At the base of the product there is a load of sufficient weight made of lead. Knitting needles made of thick wire are attached to it. You can use springs made of a similar material or weights at their ends. The structure is immersed in water using rods made of durable fishing line. The entire system is equipped with a nylon mesh fabric. You can use a fishing line net. To simplify the process of operating the trap, it is supplemented with a float.

Where and when are they caught for grabbers?

This device is especially popular in the Far East; fishermen in Siberia are also satisfied with the effectiveness of the gear. The main reason is the versatility of cotton: the trap is used around the clock and at any time of the year. Grabber fishing in winter is no less popular than in summer. The only caveat is when night fishing Proper lighting is important. A simple flashlight is enough to attract the attention of crucian carp.

The grabber should be used to catch river and lake fish that are actively moving in the reservoir. Don't count on hibernating prey. If the place is chosen incorrectly, you can catch fish for a long time and not catch them - fishing with a grabber in a river with a strong current is ineffective.

Technique and tactics

The advantage of an umbrella fishing tackle is its extreme simplicity. The product sinks to the bottom of the reservoir. If fishing occurs from the shore, then it is better to do this with a long pole. The fish swims into the trap and catches the wings of the tackle. It is easier to notice the appearance of prey if the cotton is equipped with a float. All that remains is to pull the net out of the water with a sharp movement. The principle of operation of the grabber is a design feature that does not allow the fish to get out of it. To increase your catch when fishing with your umbrella grabber, you need to monitor the float and quickly lift the tackle with your hands.

Some fishermen prefer to use echo sounders, but if you act carefully, then the fisherman's trained sense will be enough to good catch. Important details:

  • if large catches are possible, it is better to fish with gloves;
  • you can get more loot in your usual place;
  • Circular movements of the current help increase the catch.

Too strong a current or a large amount of silt on the bottom can make fishing very difficult.

How to make it yourself

Gear can be purchased in specialized stores. A number of additional design features allow factory grabbers to avoid the disadvantages of homemade models. But using high-quality materials and attention to detail, you can make grabbers for winter fishing or all-season gear yourself. Since cotton is one of the simplest fishing products and is easy to use, it will not be difficult to construct.

Materials and drawings

Before making a fishing umbrella with your own hands, it is better to familiarize yourself with the drawings or watch several educational videos. In this case, it will be easier for you to correctly assemble reliable gear from the elements. The main set of popular materials for grabbers includes:

  • durable net made of nylon or fishing line;
  • four springs;
  • lead load;
  • fishing line, cord and fabric tape;
  • compact wire ring.

You can add a float to this list. A thread net serves as the basis, and a fishing line net is more suitable for the wings. It is necessary to wrap the springs with electrical tape to prevent incorrect slamming of the gear. Insulated grabber springs are attached to the load. Rods should be pulled through the side cells, and 4 rods should be tied to them. The rods are connected at the top of the product through a ring and threaded into the hole in the float. The traction cord is also tied here.

Disadvantages of a Grabber

Despite the extensive list of advantages, this gear also has negative properties. The product must sink to the bottom of the reservoir, which makes it difficult to catch fish at a significant depth. The catch is limited to species that do not hibernate and spend a lot of time on the move. A handmade grab-net often turns out to be sensitive to the current - the product does not fully open. If the bottom of the reservoir is covered with a layer of silt, the fishing process will be significantly complicated.

Many fishing enthusiasts devote all their free time to fishing. At the same time, fishermen who are in love with their occupation are engaged in the manufacture of fishing equipment, such as baits, tackles, etc.

While fishing, some silicone baits they lose part of their bodies, and it’s a pity to throw them away after that. If you collect several processed silicones, you can use them to make new working baits.

Manufacturing technology

  1. In a prepared container, gypsum is diluted to the state of thick sour cream. After this, old vibrotails or twisters are dipped into the solution to obtain templates; after the plaster has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, they are smoothed out with a sharp, thin object.
  2. The mold prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
  3. All operations for filling the mold must be carried out on outdoors or in a well-ventilated area.
  4. Old, used silicone products are crushed into pieces and placed in a bowl that is heated on the stove. To prevent the silicone from burning, it must be stirred regularly, and the fire should be at a distance of 15-20 cm from the container with silicone. If you add dyes to silicone, you can get bait of the desired color, and if you add flavoring, it will become edible silicone.
  5. The well-heated and thoroughly mixed mass is poured into the mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
  6. After about 15-20 minutes, when the silicone has cooled, the finished bait is removed from the mold, the mold is cleaned, greased with sunflower oil and the process is repeated.

Almost always, when fishing, it is necessary to quickly and efficiently change the bait or modify the equipment by changing the leash or feeder. For these purposes, there is a fastener design, quite small size. Making it at home will not be difficult.

Manufacturing technology

  1. The following tool is required:
    • wire cutters;
    • round-nose pliers;
    • tweezers.
  2. The basis of the material can be a large stapler from a stapler.
  3. The wire is bent with pliers into a shape similar in appearance to a paper clip, but smaller in size.
  4. Excess ends are cut off with wire cutters.
  5. A cambric of the appropriate size is selected so that it fits freely on the fastener.
  6. The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
  7. A piece of cambric is put on a fishing line and secured with a knot.
  8. Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
  9. Mini clasp, ready to use.

For those who regularly fish from a boat, it will be useful to have a simple but effective feeder. It will come in handy if you have to fish on a river where there is a current. To do this you will need the following elements:

  • a piece of plastic sewer pipe;
  • two fasteners;
  • lead;
  • electric drill;
  • rope, rivets;
  • loop and lock.

A piece of pipe up to 30 cm long is taken and plugs are installed on both sides. One of them is installed solidly, and the other is installed in such a way that it can be easily removed. After this, holes are drilled over the entire surface. A rope is attached to the plug that opens. To prevent the plug from opening on its own, a lock or latch of any design is installed.

WITH reverse side where the plug is rigidly fixed, the weights should be secured.

The feeder is lowered to the bottom on a rope and remains there until the end of fishing. Thanks to the drilled holes, the bait is slowly washed out of the feeder, which allows you to keep the fish at the fishing point.

Every spinner wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some fishermen have mastered, and very successfully, making wobblers at home. This is a very interesting and exciting process that does not require special equipment or tools.

How to make a wobbler

  1. To begin with, you should decide on the shape and color of the future bait. To do this, you will have to take up art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. There should be a reinforcing wire running inside them.
  2. Foam can also be used as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, having taken the necessary material, they are engaged in the manufacture of blanks.
  3. Fastenings for rings and tee hooks are prepared from thin stainless steel. The fasteners are mounted in specially cut out places located on the body of the 2 halves of the bait. the two halves are connected using glue. After the glue has dried, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
  4. After this, the wobbler should be adjusted based on personal preferences.
  5. Any depressions or voids left on the bait are filled with epoxy resin, after which the bait is sanded and prepared for painting. Painting is also carried out depending on your own imagination.

It’s not at all difficult to make a rotating spoon yourself, if you have at least some skills in working with tools and materials. To make it you will need:

  • regular paper clip;
  • tee (hook);
  • metal plate, 0.5-1 mm thick;
  • not a big bead;
  • a piece of sheet lead;
  • tools: file, pliers, needle files, scissors.

First, on a piece of cardboard you need to draw the shape of a petal for the future bait, after which the drawing is transferred to the metal. Take scissors and carefully cut out a petal from a piece of metal. After this, the cut petal is processed with a file so that there are no burrs. Two holes are drilled along the edges of the petal (one on each edge) and processed with needle files. The places where the holes are drilled must be bent 90 degrees in relation to the petal. Then you need to take the wire and straighten it, and at one of its ends you need to form a loop and secure the tee.

After this, a petal and a bead are put on the same wire, after which a loop is again formed at the end of the wire to attach the fishing line. Moreover, the loop must be made so that it does not interfere with the free rotation of the petal.

The spinner requires adjustment through additional loading. A lead weight is placed between the tee and the petal. Again, everything needs to be calculated correctly so that the load does not interfere with the rotation of the petal. The last stage is painting the petal.

Arriving for fishing, you have to spend a lot of time catching live bait. The fact is that in the summer it is very difficult to store live bait: it quickly dies in any container, and live bait must always be vigorous. A device made from 2 plastic bottles will help solve this problem:

  1. Take 2 liter plastic bottle, in which half the neck is cut off.
  2. After this, the neckline is cut off from the same side at the widest part.
  3. The result is a piece that looks like a watering can.
  4. The bottom of this bottle is cut off.
  5. Take a second bottle and cut off the bottom at a distance of 5-7 cm from the greatest thickness.
  6. Finally, the structure is put together. The cut “watering can” is inserted back, but only in reverse, with the thinnest part inward, after which the structure is firmly connected using artificial threads. Take another bottle and put the cut end on the first bottle with a neck.
  7. A weight and rope are attached to the trap.

After this, you can place bait in the trap and lower the trap to the bottom of the reservoir. A fish that falls into a trap will no longer be able to get out of it. If you need live bait, you just need to pull the trap out of the water. In order for the fry to always be fresh and lively, the trap must be kept in water for an indefinite period of time.

In winter, the most common tool for catching predators (pike) is girders. It turns out that it can be done quickly and easily:

  1. The basis for its manufacture is a PVC sewer pipe, 32 mm thick. The pipe needs to be cut into pieces 10-15 cm in size.
  2. It is better to file all uneven areas where the cuts are made.
  3. 3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and on the other side one hole is made for the line stopper. Its diameter is 1 mm.
  4. A line stopper is formed in the shape of the letter P and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
  5. A ring is formed from a fishing line 0.4-0.5 mm thick, which is passed through two holes located opposite each other. This ring will serve as a kind of fastening. The vent is attached to a metal rod firmly driven into the ice.
  6. About 10 meters of fishing line is wound onto a piece of pipe.
  7. A corresponding weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use at the end of the pipe; red tape should be secured at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for crucian carp

The average crucian carp, which most anglers catch, prefers semolina bait prepared according to a special recipe.

Recipe catchable bait for crucian carp:

  • Pour water into a bowl, add a couple of drops of flavoring, and bring to a boil.
  • Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
  • The heat is turned off to allow the porridge to cool and steam.
  • After reaching room temperature, knead the porridge with your hands to obtain even greater density.
  • After this, the porridge is wrapped in several layers of gauze.
  • It is not recommended to wrap porridge in plastic.

Balls are molded well from the finished porridge, after which they are placed on a hook.

Recipe for preparing porridge bait using the cold method:

  • Water from the pond is collected into a suitable container and a little flavor is added.
  • After this, semolina is added to the bowl with vigorous stirring.
  • As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if you lift the spoon with the porridge up and turn it over, the porridge should remain in the spoon.
  • Stirring is stopped and the porridge is left for 10 minutes to swell.
  • Finally, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed onto the hook in a spiral so that the tip of the hook is the last to close.